A Guide to Opening E-Liquid Bottles E-liquid bottles are designed with specific safety features, which can sometimes make them tricky to open for the first time. This guide provides a clear, step-by-step process for opening standard 10ml e-liquid bottles and larger shortfills, along with tips for dealing with stubborn caps and what to do if a bottle is damaged. Understanding Child-Proof and Tamper-Evident Caps By law in the UK and EU, all e-liquid bottles must be fitted with child-proof and tamper-evident caps to comply with regulations. The child-proof mechanism typically consists of an outer cap that spins freely and an inner cap with interlocking teeth. To open the bottle, you must engage these two parts by pushing down or squeezing the cap firmly while turning it. Additionally, the tamper-evident seal is a small plastic ring at the base of the cap that breaks when opened for the first time. Before opening, always check that this seal is intact to ensure the product has not been previously opened or tampered with. These features are essential for preventing accidental ingestion and ensuring product safety. How to Open a Standard 10ml Bottle To open a standard 10ml bottle, first grip it firmly on a stable surface. Next, apply firm, downward pressure directly onto the cap to engage the child-proof lock. While continuing to push down, twist the cap anti-clockwise (to the left) until it unscrews and opens. Note: Some bottle designs may require you to squeeze two indicated points on the sides of the cap firmly while twisting, instead of pushing down. Opening Shortfill Bottles and Adding Nicotine Shots Larger shortfill e-liquid bottles use the same push-and-twist cap mechanism. To add a nicotine shot, however, you must also remove the larger nozzle underneath the cap. The process begins by prying the nozzle off, which can be done with a dedicated opener tool or carefully with the edge of a flat-bladed tool. Once the nib is removed, you can add the desired number of 10ml nicotine shots into the bottle. For example, adding one 18mg nic shot to a 50ml shortfill creates 60ml of 3mg strength e-liquid. After adding the nicotine, securely press the nozzle back into place until it clicks. Finally, screw the main cap on tightly and shake the bottle vigorously for at least one minute to ensure the nicotine is evenly mixed. Tips for Stubborn or Damaged Bottles If a cap is stuck due to crystallised e-liquid, try running the cap area under hot (not boiling) water for a minute. This can help dissolve the residue and make the plastic more pliable. For extra grip when twisting, using a tea towel or rubber gloves can also be very effective. If a bottle's nib is only slightly cracked, you may be able to carefully trim the damaged tip with scissors. However, if the main bottle is compromised, the contents should be carefully transferred to a new, clean, and empty e-liquid bottle, using a small funnel to avoid spills. Never use a damaged bottle. E-Liquid Storage and Safety Recommendations For proper storage, always keep e-liquid bottles upright in a cool, dark place, away from direct sunlight. It is also important to ensure the caps are tightly sealed to prevent leaks and oxidation, which can degrade the flavour. Most importantly, all e-liquid products must be kept out of the reach of children and pets at all times. Frequently Asked Questions How do I open a child-proof e-liquid bottle?To disengage the lock, you must push down firmly on the cap (or squeeze its designated sides) and twist anti-clockwise at the same time. What can I do if I can't open the bottle by hand?To get a better grip, try using a cloth or rubber gloves. For very stuck caps, a pair of pliers can be used with caution to avoid damaging the bottle. What should I do with a broken e-liquid bottle?If the bottle itself is broken, the contents should be safely transferred to a new, airtight bottle. If only the nib is damaged, it can sometimes be trimmed. Contact your supplier if you receive a broken product.

How to Clean and Maintain Your Vaporesso Vape Device Proper, regular maintenance is essential for extending the lifespan and ensuring the optimal performance of any vape device. Many common issues can be prevented with simple cleaning routines. This guide provides clear instructions on how to clean and maintain your Vaporesso kit, whether it's a compact pod system or a more advanced sub-ohm mod, helping you get the most from your investment. Essential Weekly Cleaning Routine Regular cleaning prevents the build-up of e-liquid residue, dust, and pocket lint, which can degrade performance and cause connection issues. A quick weekly clean is highly recommended. For Pod Systems (e.g., XROS, Luxe Series): Disconnect the Pod: Always remove the pod from the device before cleaning. Wipe the Connection Points: Use a dry cotton bud to clean the metallic contacts on both the pod and inside the device. A clean connection is vital for performance. Clear Airflow Holes: Gently blow through the airflow inlets or use the tip of a dry cotton bud to clear any condensation or dust. Clean the Mouthpiece: Regularly wipe the mouthpiece with a tissue to keep it clean. For Sub-Ohm Kits (e.g., Gen, Armour Series): Disassemble Safely: Remove the tank from the mod and, if using external batteries, remove them as well. Clean the 510 Connector: This is the threaded connection point for the tank. A dry cotton bud will remove any e-liquid residue or debris that can cause connection errors. Wipe the Mod Exterior: Use a dry or very slightly damp cloth to clean the body of the device, taking care to avoid getting moisture near buttons or ports. Check Battery Contacts: On external battery mods, gently wipe the contacts in the battery bay with a dry cloth to ensure a solid connection. Proper Battery Care and Safety Correct battery care is crucial for both the longevity of your device and your personal safety. For Devices with Internal Batteries: Avoid Full Discharges: Lithium-ion batteries last longer with partial discharge cycles. Try to charge the device before the battery is completely empty. Do Not Overcharge: Unplug the device once it is fully charged. Avoid leaving it to charge overnight. Use Quality Cables: Use the charging cable provided with your device or a high-quality replacement from a reputable brand. Monitor Temperature: If the device becomes unusually hot during charging, disconnect it immediately. For Devices with External Batteries: Inspect Wraps: Regularly check for any nicks or tears in the battery's plastic wrap. If damaged, do not use the battery until it is safely re-wrapped. Marry Your Batteries: In a dual-battery mod, always use two identical batteries, charging and discharging them together as a dedicated pair. Store Safely: Never carry loose batteries in a pocket or bag. Always use a dedicated battery case to prevent short circuits. Knowing When to Replace Components Recognising when parts are worn out will ensure you always have the best possible vaping experience. Signs You Need a New Coil or Pod: A distinct burnt taste. Significantly diminished flavour from your e-liquid. A noticeable reduction in vapour production. Leaking or gurgling sounds, which can indicate the cotton wicking is failing. The coil appears visually dark, clogged, or "gunked-up". Signs You May Need a New Device: The internal battery no longer holds a sufficient charge. Buttons become unresponsive or fire intermittently. The screen is damaged or shows persistent errors. Physical damage to the charging port or other critical areas. Troubleshooting Common Vaping Issues Device Not Firing: Ensure the device is powered on (typically 5 clicks of the fire button). Check the battery level. Clean the pod/tank and device connection points. Confirm the coil is installed correctly. Leaking Pod/Tank: Check all seals and O-rings for damage. Ensure the coil is screwed in securely but not over-tightened. Avoid overfilling the tank or pod. Ensure your e-liquid's PG/VG ratio is appropriate for your coil. Poor Flavour: The most common cause is a worn-out coil that needs replacing. Also, ensure all connections are clean.

The Technology Behind Vaporesso's Flavour Performance Vaporesso has earned a reputation for delivering exceptional flavour performance in its vaping devices. This is not by chance but is the result of specific engineering principles and proprietary technologies designed to maximise the taste of e-liquids. This guide breaks down the key innovations that contribute to Vaporesso's renowned flavour production. Advanced Mesh Coil Design A cornerstone of Vaporesso's flavour technology is the widespread adoption of mesh coils, such as those in the GTX and XROS pod families. Unlike traditional wire coils that can heat unevenly, mesh coils feature a large, flat surface area. This design ensures rapid and even heating across the entire wicking material, vaporising e-liquid more efficiently. The result is more consistent flavour, enhanced vapour production, and a significant reduction in the likelihood of burnt hits. The latest COREX technology further refines this with morph-mesh structures designed for optimal heat distribution and longevity. Consistent Power Delivery with the AXON Chipset The consistency of flavour throughout a battery's charge cycle is another critical factor. Vaporesso's proprietary AXON chipset addresses this with 'Pulse Mode'. This feature delivers power in rapid pulses, ensuring a steady output from the first puff to the last, even as the battery level depletes. This prevents the drop-off in performance common in simpler devices. Furthermore, the AXON chip's smart wattage feature automatically detects the installed coil's resistance and suggests the ideal power level, preventing user error and maximising both flavour and coil life. Precision Airflow Engineering Often overlooked, airflow engineering is a critical component of flavour production. Vaporesso devices feature precisely designed airflow systems that direct air to sweep across the entire coil surface. This ensures all the generated vapour is collected and delivered smoothly. In advanced models like the Gen series, multi-directional airflow systems are used to fully envelop the coil, providing optimal cooling and maximising flavour capture. This meticulous design prevents both hot spots that can cause burnt tastes and excessive airflow that can dilute flavour intensity. Efficient E-Liquid Wicking The efficiency with which e-liquid is delivered to the heating element is vital for consistent flavour. Vaporesso's COREX pods utilise a proprietary 'Cumulus cotton', a fluffy and highly absorbent material that ensures the coil remains consistently saturated. This superior wicking prevents dry hits and maintains stable flavour throughout the life of the pod. In their larger tank systems, adjustable juice flow control allows users to fine-tune the delivery to match the e-liquid's viscosity and their vaping style, preventing both flooding and dry hits. Fine-Tuning Flavour with Temperature Control For the ultimate level of customisation, advanced Vaporesso mods offer a comprehensive Temperature Control (TC) mode. Different flavour compounds within an e-liquid vaporise at optimal temperatures. By allowing the user to set a precise temperature limit, TC mode ensures that delicate flavour notes are not scorched by excessive heat. This results in a more nuanced and complete flavour profile, bringing out the full complexity of the e-liquid as intended by its creator.

A Guide to Lost Mary Pre-filled Pod Systems The vaping landscape has evolved significantly, with a growing demand for user-friendly and convenient devices. Pre-filled pod systems have emerged as a popular solution, combining the simplicity and mess-free nature of disposable vapes with the cost-effectiveness and sustainability of a rechargeable device. As the UK prepares for changes in vaping regulations, these systems offer a compliant path forward for many users. Lost Mary has become a prominent name in this category, offering a range of pre-filled pod kits designed to streamline the vaping experience. An Overview of Lost Mary Pre-filled Kits Lost Mary offers several pre-filled pod systems catering to different needs, from light users to those seeking maximum capacity. All models are draw-activated for simplicity and feature USB-C for convenient charging. BM600 Pod Kit: This device mirrors the compact, bottle-flask shape of the popular disposable model but houses a rechargeable battery. It's designed for simplicity and portability, utilising pre-filled pods that provide approximately 600 puffs each. BM6000 Kit: A step-up in capacity, the BM6000 features a TPD-compliant design that incorporates a 2ml pod alongside a separate 10ml e-liquid container. This container automatically refills the pod, delivering a total of around 6000 puffs before the entire pod and refill unit needs to be replaced. Nera 30K Kit: The brand's flagship model, the Nera 30K is a high-capacity device featuring a distinctive curved screen that displays battery life, puff count, and power settings. It achieves its 30,000-puff capacity through a system of two 2ml pods and two 10ml refill containers. It includes a larger 800mAh battery and variable power modes for a more customised experience. Key Advantages of Pre-filled Pod Systems Pre-filled pod kits offer a number of benefits, particularly for those transitioning from disposables or seeking a more convenient alternative to traditional refillable systems. Consistent Flavour: Each pod is designed to deliver consistent flavour from the first puff to the last, eliminating the flavour drop-off sometimes experienced with aging coils. Ease of Use: There is no need to handle e-liquid bottles or change coils. Users simply replace the empty pod with a new one, making it a clean and hassle-free process. Reliability: The closed-pod design significantly reduces the chances of common issues like leaking, gurgling, or dry hits. Portability: These devices are designed to be compact, lightweight, and discreet, making them easy to carry in a pocket or bag. Cost-Effectiveness: While the initial kit purchase is an investment, the ongoing cost of replacement pods is considerably lower than regularly buying new disposable vapes. Reduced Environmental Impact: By reusing the battery component, these systems generate significantly less plastic and battery waste compared to their single-use counterparts. Lost Mary Flavour Selection and Specifications Lost Mary provides a wide range of popular flavours, consistent across all their pre-filled pod devices. The e-liquid used is the well-known MaryLiq brand of nicotine salts. Popular flavour profiles include Strawberry Ice, Blue Razz Lemonade, Triple Mango, and Blueberry Sour Raspberry. The flavours are designed to replicate the popular tastes found in their disposable range. Technically, all pods contain a 50/50 VG/PG e-liquid blend, which is ideal for the mouth-to-lung (MTL) style of vaping that these devices provide. The use of mesh coil technology in the pods ensures efficient wicking and consistent flavour production. Currently, the pods are only available in a 20mg (2%) nicotine strength, which is suitable for users seeking a strong nicotine hit, similar to that of disposables or traditional cigarettes. Conclusion Lost Mary's pre-filled pod range offers a straightforward, convenient, and compliant alternative to disposable vapes. With options catering to different user needs—from the ultra-compact BM600 to the high-capacity Nera 30K—they provide a reliable and flavourful experience for those who prioritise ease of use and consistency.